More Views
MDT XRS Forend Weight - Black
Product In stock
SKU:035744
Only 1 left
£83.99
Add weight to the front section (forend) of your MDT XRS Chassis System to achieve optimal balance and help reduce felt recoil.
Sepcs:
Single-piece steel weight that fills the XRS forend
Installs easily, sliding under the barrel
Nitrided finish for corrosion resistance
Approximate dimensions: 10" x 1.125" x 0.5"
Clearance for barrel contours up to 1.25"
Adds 1lb of weight to the front section of the chassis to tune the balance point of the rifle, and reduce felt recoil
Includes underside clearance slot for M-LOK nut clearance
Includes all hardware (6x 10-24 x 5/8" Flat-Head Cap Screws) for mounting to XRS forend
Compatibility:
The XRS Forend Weight is compatible with the MDT XRS Chassis System only.
As of 2021 we have updated the XRS Chassis forend to accept this forend weight, if you purchased your MDT XRS Chassis prior to 2021 you may need to purchase our retro-fit kit in order to accept this forend weight.
Top takeaways
The MDT XRS Forend Weight adds 1lb to the front of the MDT XRS Chassis System to improve balance and reduce recoil.
It is made of steel with a nitrided finish for corrosion resistance and fits barrel contours up to 1.25 inches.
Compatibility is limited to the MDT XRS Chassis System, with a retro-fit kit required for chassis purchased before 2021.
Sepcs:
Single-piece steel weight that fills the XRS forend
Installs easily, sliding under the barrel
Nitrided finish for corrosion resistance
Approximate dimensions: 10" x 1.125" x 0.5"
Clearance for barrel contours up to 1.25"
Adds 1lb of weight to the front section of the chassis to tune the balance point of the rifle, and reduce felt recoil
Includes underside clearance slot for M-LOK nut clearance
Includes all hardware (6x 10-24 x 5/8" Flat-Head Cap Screws) for mounting to XRS forend
Compatibility:
The XRS Forend Weight is compatible with the MDT XRS Chassis System only.
As of 2021 we have updated the XRS Chassis forend to accept this forend weight, if you purchased your MDT XRS Chassis prior to 2021 you may need to purchase our retro-fit kit in order to accept this forend weight.
Top takeaways
The MDT XRS Forend Weight adds 1lb to the front of the MDT XRS Chassis System to improve balance and reduce recoil.
It is made of steel with a nitrided finish for corrosion resistance and fits barrel contours up to 1.25 inches.
Compatibility is limited to the MDT XRS Chassis System, with a retro-fit kit required for chassis purchased before 2021.
Details
Add weight to the front section (forend) of your MDT XRS Chassis System to achieve optimal balance and help reduce felt recoil.
Sepcs:
Single-piece steel weight that fills the XRS forend
Installs easily, sliding under the barrel
Nitrided finish for corrosion resistance
Approximate dimensions: 10" x 1.125" x 0.5"
Clearance for barrel contours up to 1.25"
Adds 1lb of weight to the front section of the chassis to tune the balance point of the rifle, and reduce felt recoil
Includes underside clearance slot for M-LOK nut clearance
Includes all hardware (6x 10-24 x 5/8" Flat-Head Cap Screws) for mounting to XRS forend
Compatibility:
The XRS Forend Weight is compatible with the MDT XRS Chassis System only.
As of 2021 we have updated the XRS Chassis forend to accept this forend weight, if you purchased your MDT XRS Chassis prior to 2021 you may need to purchase our retro-fit kit in order to accept this forend weight.
Top takeaways
The MDT XRS Forend Weight adds 1lb to the front of the MDT XRS Chassis System to improve balance and reduce recoil.
It is made of steel with a nitrided finish for corrosion resistance and fits barrel contours up to 1.25 inches.
Compatibility is limited to the MDT XRS Chassis System, with a retro-fit kit required for chassis purchased before 2021.
Additional Information
| Condition | New |
|---|