Hornady ELD-M 7mm 162 Gr Horn-28403

Extend your range and never compromise at any distance! ELD (Extremely Low Drag Match) ELD Match bullets are technologically advanced, enhanced accuracy target bullets featuring Heat Shield tips with the PERFECT MEPLAT (tip point) combined with numerous design features that deliver the highest-in-class ballistic coefficients, superior accuracy and extreme consistency from bullet-to-bullet, lot-to-lot. All manufacturers commonly used polymer tips in high BC bullets melt in flight.Hornady engineers discovered that commonly used bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds ). To counter this effect, Hornady identified a heat resistant polymer and developed the Heat Shield tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. Superior accuracy and industry leading ballistic design has been achieved with the ELD Match bullet. An optimum secant ogive and boattail design along with the Heat Shield tip produce a bullet with the highest possible ballistic coefficient in its class. Verified by Doppler Radar, ELD Match ballistic coefficients do not vary due to the integrity of the Heat Shield tip. The bullets perform extraordinarily consistently with no BC degradation at extended range ELD Match Extremely Low Drag - Match Best-in-class BCs The Heat Shield tip defies the effects of aerodynamic heating and retains its shape to provide a perfect meplat (tip) that is always the same shape. Delivers the highest degree of accuracy and bullet-to-bullet/lot-to-lot consistency. Streamlined secant ogive with optimum boattail design highly concentric AMP bullet jackets Heat Shield tip creates a supremely accurate, high BC match bullet. Accurate, radar verified BCs ELD-Match bullet BCs are measured with Doppler radar and corrected to standard atmospheric conditions. Available as component bullets or in factory loaded Hornady Match ammunition.