More Views

Krieghoff K80 Titanium Front Hanger 2 (1.0mm)

Product In stock

SKU:027014

Only 1 left

£130.00
Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the titanium choke tubes the difference in handling is noticeable. Available in sizes #1, #2, #3, #4, #5 and #6 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit.

Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

Details

Titanium Front hanger for your K-80. This hanger is considerably lighter than the standard steel version and is very useful to any shooter looking to shed a little weight from the muzzle. When combined with the titanium choke tubes the difference in handling is noticeable. Available in sizes #1, #2, #3, #4, #5 and #6 for factory choke tube barrels only. Fixed and Briley choked barrels are of a smaller diameter at the muzzle meaning that these titanium hangers will not fit. Fitting requires that you remove the hanger cross pin with a suitable pin punch. We recommend 1.4mm diameter. Change the hanger and replace the cross pin. A useful tip is to put the hollow cross pin onto a thin pin punch, 0.9mm diameter, and use the punch to support the pin whilst it is tapped home.

Additional Information

Condition New

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.